Bulkhead Fitting Kit
Four pass-throughs. Eight elbows. One clean floor. Air lines have to cross the floor somewhere. Most builds do it through a drilled hole with a grommet and a prayer - and eighteen months later the line has chafed on the cut edge and you are chasing a leak you cannot see. A bulkhead ends that argument. The line terminates at the panel on one side and picks up again on the other; the panel carries the fitting; nothing rubs on raw steel. This kit covers all four corners: four bulkheads through the floor and eight swivel elbows so every line turns where it needs to without kinking. Twelve fittings; one afternoon; a trunk that looks like somebody planned it.
Install Level: Moderate
Twelve fittings. Enough for a four corner install.
Universal air management part. No vehicle application is published.
On all air suspension systems, you are going to have a variety of fittings to get your airlines connected to your core components. These fittings are usually made of brass construction for a high-quality component. However, these can sometimes be damaged during install, lost, or simply worn out over time. Whether you are installing new fittings on a new install or replacing old/damaged fittings on an existing kit, AccuAir has you covered with this direct replacement fitting kit. This kit is going to feature everything you need to install new fittings on your air suspension system. In this kit, you will receive (4) 3/8" Tube DOT / PTC - To - 3/8" Tube DOT / PTC Bulk-Heads + (8) 3/8" Tube DOT / PTC - To - 3/8" Tube DOT / PTC Swivel Elbow.
These are perfect for getting the air lines from your air springs under the car into the trunk or bed of your vehicle in a clean way without fear of drilled or cut metal damaging the air line.
Type: bulkhead and swivel elbow fitting kit
Contents: 4 x 3/8 inch Tube DOT/PTC to 3/8 inch Tube DOT/PTC bulkhead
Contents: 8 x 3/8 inch Tube DOT/PTC to 3/8 inch Tube DOT/PTC swivel elbow
Total: 12 fittings
Line size: 3/8 inch DOT air line both sides
Coverage: four corners - one bulkhead and two elbows per corner
Listed price 153.95 USD
No thread size; hole size; drill size; panel thickness range or o-ring size is published on this listing
Covers a four corner install - one bulkhead through the floor per corner with two swivel elbows each.
Both ends of every fitting take 3/8 inch DOT push-to-connect air line.
No Gen: tag; year or model application is published on this listing so generations are left blank rather than guessed.
