- 8 FT. #6 (Liquid) refrigerant hose  (condenser to drier to evaporator)
- 8 FT. of 5/8 Heater Hose
- 4 FT. #8 (Discharge) refrigerant hose (compressor to condenser)
- 5 FT. #10 (Suction) refrigerant hose (compressor to evaporator)
- #6, #8, #10 hose mounting clamps
- tie wraps
- (4) flexible firewall grommets
- Mineral Oil (O’ring fitting lube)
- Large Capacity Receiver/Drier (6” X 2.5”)
- HI/Low Safety Pressure Switch
- (4) Condenser Mounting Brackets
- O’Ring Bag kit
Refrigerant Hose Kit with Drier and Pressure Switch
Hoses; drier; and the switch that saves the compressor. Most A/C jobs die at the plumbing. You have a unit under the dash and a condenser in front of the radiator and nothing correct in between - wrong hose size; the wrong fitting angle; a drier hanging off a hose clamp. This kit is the whole middle of the system. Eight feet of #6 liquid; four feet of #8 discharge; five feet of #10 suction; plus eight feet of 5/8 heater hose. Straight and 90 degree fittings in black with O-ring connections and crimp ferrules; two of them with R134a charge ports already built in. The large capacity receiver/drier comes with its switch port and a wide circle clamp to mount it. The hi/low safety switch is what makes this version worth the difference - it cuts out at 28 lbs when the system goes low and at 380 lbs when it over-pressures. That is the difference between a slow leak and a new compressor. Grommets; clamps; tie wraps; O-rings and fitting lube are all in the box. Build the system once and build it right.
Install Level: Advanced - refrigerant hose crimping; evacuation and charging required
Fittings included: two #6 straight; four #6 90 degree; two 5/8 heater hose crimp straight; one #8 straight; one #8 90 degree; one #8 90 degree with R134a charge port; one #10 straight; one #10 90 degree; one #10 90 degree with R134a charge port. All black.
For use with R134a refrigerant.
Hose crimping is required; this kit ships with crimp ferrule fittings.
WARNING: Handling passenger or off-highway motor vehicle parts can expose you to chemicals such as phthalates and lead. Learn more.
Refrigerant Hose Kit with Drier and Pressure Switch
$310.00
Hose kit includes barrier hoses for use with R134a refrigerant. All Air Fittings are black coated with O-ring connections with crimp ferrules. Kits for the R134a include fittings with charge port. Includes 8 ft. of #6 (Liquid) refrigerant hose , 4 ft. of #8 (Discharge) refrigerant hose, and 5 ft. of #10 (Suction) refrigerant hose, along with #6, #8, #10 hose mounting clamps, tie wraps, O-ring set, air tight and flexible firewall grommets and fitting lube. Large Capacity Receiver/Drier supplied 6” x 2.5” with switch port for safety switch. Comes with a wide circle clamp supplied to mount your receiver/drier. Also supplied pressure switch, line fitting and wire harness. Our hi-low pressure switch kit is highly recommended in all A/C systems. Cuts out at 28 lbs. when the system runs low on refrigerant. When the system over-pressures, it cuts out at 380 lbs. to prevent compressor and hose damage.
Your kit Includes:
- Electrical connectors
- Condenser/ Drier mounting hardware
- (2) #6 Liquid Hose Straight Fittings (black)
- (4) #6 Liquid Hose 90 degree Fittings (black)
- (2) 5/8 Heater Hose Crimp Straight Fittings (black)
- (1) #8 Discharge Hose Straight Fitting (black)
- (1) #8 Discharge Hose 90 degree Fitting (black)
- (1) #8 Discharge Hose 90 degree w/ R134a Charge Port Fitting (black)
- (1) #10 Suction Hose Straight Fitting (black)
- (1) #10 Suction Hose 90 degree Fitting (black)
- (1) #10 Suction Hose 90 degree w/ R134a Charge Port Fitting (black)
Restomod Air part number RM-13-5016
Vendor: Restomod Air
Refrigerant: R134a
Hose: barrier hose; 8 ft of #6 liquid; 4 ft of #8 discharge; 5 ft of #10 suction
Heater hose: 8 ft of 5/8
Fittings: black coated with O-ring connections and crimp ferrules; R134a charge port fittings included
Receiver/drier: large capacity; 6 inch x 2.5 inch; switch port for safety switch; wide circle clamp supplied
Pressure switch: hi/low safety switch; cuts out at 28 lbs low and 380 lbs high; line fitting and wire harness supplied
Also included: four condenser mounting brackets; four flexible firewall grommets; hose mounting clamps; tie wraps; O-ring bag kit; mineral oil fitting lube; electrical connectors; condenser and drier mounting hardware
Listed price 310.00 USD
Variant count: 1
Vendor: Restomod Air
Refrigerant: R134a
Hose: barrier hose; 8 ft of #6 liquid; 4 ft of #8 discharge; 5 ft of #10 suction
Heater hose: 8 ft of 5/8
Fittings: black coated with O-ring connections and crimp ferrules; R134a charge port fittings included
Receiver/drier: large capacity; 6 inch x 2.5 inch; switch port for safety switch; wide circle clamp supplied
Pressure switch: hi/low safety switch; cuts out at 28 lbs low and 380 lbs high; line fitting and wire harness supplied
Also included: four condenser mounting brackets; four flexible firewall grommets; hose mounting clamps; tie wraps; O-ring bag kit; mineral oil fitting lube; electrical connectors; condenser and drier mounting hardware
Listed price 310.00 USD
Variant count: 1
A universal R134a refrigerant hose kit for classic Ford and Chevy truck A/C installations from 1947 through 1987 as tagged.
Supplies the hose; fittings; drier; pressure switch; grommets and hardware between the compressor; condenser and evaporator.
Fitment is set by your A/C system components rather than by the cab.
Supplies the hose; fittings; drier; pressure switch; grommets and hardware between the compressor; condenser and evaporator.
Fitment is set by your A/C system components rather than by the cab.
