VIAIR Dual 485C Air Compressor Kit - Gen 2

Two compressors. One hundred percent duty at 200 psi. A single undersized pump is the reason air systems disappoint. It fills slowly; it heats up; it gets loud right when you want it quiet and it dies in the summer of the second year. The 485C is VIAIR's 200 psi working pressure pump and this kit runs a pair of them. Combined they pull 55 amps and fill a 5 gallon tank from empty to 200 psi in four minutes fifty; a top up from 165 to 200 takes a minute fifteen. The Gen 2 head design raised the duty cycle and dropped the noise. Both pumps come with thermal overload protection; stainless braided leader hoses with inline check valves; remote mount brackets and filter assemblies so the intakes can live somewhere clean and dry. Relays; a fuse holder and a 165 on / 200 off pressure switch are in the box. IP67 rated. Mount them where they will get wet and stop thinking about it.

  • 100 percent duty at 200 psi - the pumps are rated to run as long as the tank needs rather than to a time limit.
  • Two pumps; 55 amps - a 5 gallon tank goes from empty to 200 psi in under five minutes.
  • IP67 rated - mount them under the truck where the water is and stop worrying about the weather.
  • Remote mount filters - the intakes go somewhere clean and dry; the pumps go where there is room.
  • Check valves built in - the stainless braided leader hoses hold tank pressure back out of the heads.
  • Wiring in the box - two 40 Amp relays; a 60 Amp class fuse holder and the 165 on / 200 off switch.

Install Level: Advanced

Kit contains two 485C compressors with thermal overload protectors; two air filter assemblies; two removable filter covers; two remote mount brackets; two sets of remote mount fittings; two sets of spare air filter elements; two leader hose clips; six air line clips with hardware; eight sets of nuts; bolts; washers and lock washers; one heavy duty tube style fuse holder up to 60 Amp; two 40 Amp relays; one pressure switch 165 PSI on and 200 PSI off; two stainless steel braided leader hoses with inline check valve; and air line for remote mount filter installation.
Air tank is not included.

Accuair Suspension
SKU: AA-3692.1 ISBN: 99709886
Expert Tech Support
ShopTested Parts
Worldwide Shipping
⚠️
WARNING: Handling passenger or off-highway motor vehicle parts can expose you to chemicals such as phthalates and lead. Learn more.
VIAIR Dual 485C Air Compressor Kit - Gen 2
$549.95
Overview
Specifications
Tech Resources
Compatibility

If you are looking for the best air compressors for your air ride suspension, look no further than the dual VIAIR 485C air compressor setup. VIAIR is a leader in the air compressor industry for air suspension systems and this 485C air compressor delivers game-changing performance. The 485C compressor from VIAIR is rated at 100% duty @ 200 PSI and is a true 200 PSI-rated working pressure pump. Featuring a newly-developed, sleek head design, these VIAIR compressors have an increased duty cycle and quieter dB levels to make for a more appealing setup in most air suspension setups. These dual air compressors are offered in a Stealth Black finish and are equipped with a stainless steel leader hose and an inline check valve. These dual compressors are recommended for a 3-5 gallon air tank.

Details

  • (2) 485C (Platinum or Stealth Black) Compressors w/Thermal Overload Protectors

  • (2) Air Filter Assemblies

  • (2) VIAIR Removable Filter Covers

  • (2) Remote Mount Brackets

  • (2) Sets of Remote Mount Fittings

  • (2) Sets of Spare Air Filter Elements

  • (2) Leader Hose Clips

  • (6) Air Line Clips with Included Hardware

  • (8) Sets of Nuts, Bolts, Washers, and Lock Washers

  • (1) Heavy Duty Tube Style Fuse Holder (Up to 60-Amp fuse)

  • (2) 40-Amp Relays

  • (1) One Pressure Switch (165 PSI on, 200 PSI off)

  • (2) Stainless Steel Braided Leader Hoses with Inline Check Valve

  • Air Line (For Remote Mount Filter Installation)

Specifications

  • 12-Volt

  • Permanent Magnetic Motor

  • Duty Cycle: 100% @ 200 PSI

  • Max. Working Pressure: 200 PSI

  • Max. Air Tank Size: 10.0 Gallon

  • Combined Max. Amp Draw: 55 Amps

  • Ingress Protection Rating: IP67

  • Dimensions: 10.63″L x 4.1″W x 6.44″H

  • Net Weight: 22.10 lbs

Fill Rates

2.5 GALLON TANK

FILL RATE

0 to 200 PSI

2 min. 20 sec. (± 05 sec.)

165 to 200 PSI

35 sec. (± 03 sec.)

5.0 GALLON TANK

FILL RATE

0 to 200 PSI

4 min. 50 sec. (± 15 sec.)

165 to 200 PSI

1 min. 15 sec. (± 05 sec.)

Accuair part number AA-3692.1 on the Stealth Black variant
Compressors: two VIAIR 485C with thermal overload protectors
Voltage: 12 Volt
Motor: permanent magnetic
Duty cycle: 100 percent at 200 PSI
Maximum working pressure: 200 PSI
Maximum air tank size: 10.0 Gallon
Combined maximum amp draw: 55 Amps
Ingress protection rating: IP67
Dimensions: 10.63 inch L x 4.1 inch W x 6.44 inch H
Net weight: 22.10 lbs
Pressure switch: 165 PSI on and 200 PSI off
Fill rate 2.5 Gallon tank: 0 to 200 PSI in 2 min 20 sec plus or minus 5 sec
Fill rate 2.5 Gallon tank: 165 to 200 PSI in 35 sec plus or minus 3 sec
Fill rate 5.0 Gallon tank: 0 to 200 PSI in 4 min 50 sec plus or minus 15 sec
Fill rate 5.0 Gallon tank: 165 to 200 PSI in 1 min 15 sec plus or minus 5 sec
Leader hoses: stainless steel braided with inline check valve
Fuse holder: heavy duty tube style up to 60 Amp fuse
Relays: two 40 Amp
Published finishes: Stealth Black and Platinum
Listed price 549.95 USD on the Stealth Black variant
The published dimensions and net weight are not stated as per compressor or per kit
Universal air management component. This kit is defined by the system it feeds rather than by the chassis it mounts to.
No Gen: tag and no vehicle application is published on this listing; generations are left blank rather than guessed.
Published maximum air tank size is 10.0 Gallon. The body recommends a 3 to 5 gallon tank for this pair.
Two finishes are published: Stealth Black and Platinum.

SEARCH OUR STORE

Engines, A/C accessories, steering, brakes, & more. Get everything you need for your truck restoration at home.