A/C Components, air, Air Management, Air Ride, Air Suspension, Dropship, DropshipOnly(NoBundle), fitting, Fittings, harness, linkage, replace, replacement, ride, Suspension, ROT-120 Linkage & Hardware, Suspension, Fat Fender Garage, Accuair Suspension

ROT-120 Linkage & Hardware

One linkage. One hardware kit. One corner. The linkage is the small steel arm that tells a ride height sensor what the suspension is doing. It lives in the worst place on the truck - down in the arc of the control arm; in the spray; in reach of anything the front tire throws back. It bends. It gets over-extended when a corner drops further than anyone planned; and a bent linkage feeds the ECU a height that does not exist. The system then corrects a problem the truck does not have. This is the same linkage and hardware Accuair puts in an e-Level kit. Not a fabricated substitute - the parts the calibration was built around. Sensor is separate. If yours survived; this is the cheaper half of the repair.

  • Same parts as the kit - the linkage the e-Level calibration was built around rather than a fabricated substitute.
  • Hardware included - the fasteners come with it so the corner goes back together in one visit.
  • Cheaper half of the repair - a bent linkage rarely takes the sensor with it.
  • Fixes false readings - a distorted arm reports a height the truck is not at and the system corrects for nothing.
  • Built for where it lives - down in the arc of the control arm is a hard place to survive.

Install Level: Moderate

The ride height sensor is not included.
Covers one corner. A four corner system needs four kits.
The combined sensor plus linkage and hardware assembly is rot-120-ride-height-sensor-w-linkage-hardware.

Accuair Suspension
SKU: AA-3680 ISBN: 86340542
$38.95
Expert Tech Support
ShopTested Parts
Worldwide Shipping
⚠️
WARNING: Handling passenger or off-highway motor vehicle parts can expose you to chemicals such as phthalates and lead. Learn more.
ROT-120 Linkage & Hardware
$38.95
Complete your buildThe Next Step for Your Build 
Overview
Specifications
Tech Resources
Compatibility

In every AccuAir e-Level kit, you will get height sensors, linkage, and hardware. The linkage component of this kit can become damaged or broken from overextending or road debris leaving you with a malfunctioning air suspension system. AccuAir has you covered with a direct replacement ROT-120 linkage and hardware kit. This kit features the same components found in your e-Level kit to allow you to easily replace your damaged components with high-quality replacements. This kit comes with (1) linkage and (1) hardware kit. This kit does not include the ride height sensor. This will need to be purchased separately or within our ROT-120 ride height sensor w/ linkage & hardware kit.

Accuair part number AA-3680
Type: ROT-120 ride height sensor linkage and mounting hardware
Contents: 1 linkage
Contents: 1 hardware kit
Ride height sensor: not included
Coverage: one corner
Application: Accuair e-Level ride height sensing
Listed price 38.95 USD
No linkage length; adjustment range; rod end thread; material or fastener sizes are published on this listing
Universal air management component. Defined by the Accuair e-Level system it serves rather than by the vehicle.
Direct replacement for the linkage and hardware supplied in Accuair e-Level kits.
Covers one corner. The ride height sensor is not included - rot-120-ride-height-sensors-w-o-linkage-hardware.
No Gen: tag and no vehicle application is published on this listing; generations are left blank rather than guessed.

SEARCH OUR STORE

Engines, A/C accessories, steering, brakes, & more. Get everything you need for your truck restoration at home.