FFG Coyote/Godzilla Swap Transmission Cooler Port Kit
Direct mount. No adapters. One less thing to leak. Adding a transmission cooler to a 6R80; 10R80 or 10R140 usually means a stack of adapters at the case and two new joints that did not exist before. Every one of them is a place to weep fluid onto a hot exhaust. This port bolts straight to the transmission. Machined and anodized in our Arizona shop; four O-rings in the port only package and an aluminum plug for the sensor bung if you are not running one yet. The sensor port is on the outlet side on purpose. Read the fluid leaving the transmission and your fan control works off the number that actually matters; not the one that makes the gauge look calm. Pick the package that matches where your build is. Port only; port with the temp sensor; or the complete kit with a Derale Electra-Cool cooler; -8AN fittings and six or twelve feet of line depending on how far the cooler ends up from the case. Cool it right the first time and the transmission outlives the swap.
Install Level: Intermediate - transmission port fitting and AN line routing
Port ONLY includes: the port; four O-rings and an aluminum sensor plug.
Port and Temp Sensor adds the temperature sensor for cooling fan control.
Complete 6 ft kit includes: port; sensor; Derale Electra-Cool cooler; -8AN fittings and 6 ft of line.
Complete 12 ft kit is the same with 12 ft of AN line for longer routing.
Fits Ford 6R80; 10R80 and 10R140 transmissions.
A cooler mount is not included; the FFG universal transmission cooler mount is a separate part.
Direct Mount Transmission Cooler Port | 6R80, 10R80 & 10R140 | Black Anodized
Keep Your Transmission Running Cool
Your transmission deserves better than jury-rigged cooling solutions. Our black anodized Transmission Cooler Port mounts directly to your 6R80, 10R80, or 10R140 - no sketchy adapters, no extra leak points.
We didn't just drill a hole and call it good. The temp sensor port sits on the outlet side where it belongs, giving you the most accurate fluid readings for proper cooling fan control.
Built Right:
- Direct-mount design - eliminates adapters and potential failures
- Precision machined and anodized - right here in our Arizona shop
- Strategic sensor placement - outlet-side positioning for accurate readings
- Complete system compatibility - every component works together seamlessly
Choose Your Package:
- Port Only - Includes port, (4) O-rings, and aluminum sensor plug
- Port & Temp Sensor - Add temperature sensor for cooling fan control
- Complete 6' Kit - Port, sensor, Derale Electra-Cool cooler, -8AN fittings, and line
- Complete 12' Kit - Same setup with 12' of AN line for flexible routing
- Stop gambling with your transmission's life. Cool it right the first time.
Need a mount for this kit? FFG Universal Transmission Cooler Mount
Vendor: Fat Fender Garage
Material and finish: machined aluminum; black anodized
Machined in the Fat Fender Garage Arizona shop
Transmissions: Ford 6R80; 10R80 and 10R140
Mounting: direct mount to the transmission; no adapters
Sensor port: outlet side placement for accurate fluid temperature
Port ONLY contents: port; four O-rings; aluminum sensor plug
Complete kit fittings: -8AN
Complete kit cooler: Derale Electra-Cool
Line lengths offered: 6 ft or 12 ft
Drivetrain options: 5.0 Coyote (6R80/10R80); 7.3 Godzilla (10R140)
Listed price 149.99 USD for the port only configuration
Variant count: 8
No published port thread size or sensor thread size on this listing
Used across 1948-52 through 1973-79 Ford trucks and 1966-77 and 1978-79 Broncos; fitment is set by the transmission rather than the cab.
Choose the 5.0 Coyote drivetrain option for a 6R80 or 10R80 and the 7.3 Godzilla option for a 10R140.
