FFG High-Temp Exhaust Hangers Single Sided
Rigid mount. No flex. One pipe per hanger. A rubber isolator that lets the pipe wander is how a exhaust ends up kissing a floor pan at 2;000 RPM. You hear it once; you chase it for a month. These hangers start as 1/8 inch stainless steel and get laser cut to shape. The silicone grommet handles heat cycles from header proximity or a turbo without going hard and cracking. Aluminum bushings keep the joint working; stainless button head bolts and nylock nuts keep it where you set it. Pick the drop you need - 1.25 inch; 2.25 inch or 3.25 inch - and the pipe diameter you are running at 2.5 inch or 3.0 inch. Order in a 2 pack or a 4 pack depending on how many locations the system needs. Exhaust mounting is one of those jobs nobody photographs. It is also one you only want to do once.
Install Level: Intermediate - welding or drilling to mount the hanger to the chassis
Available in 2 pack and 4 pack.
Single sided; each hanger carries one pipe.
Pipe diameter options: 2.5 inch and 3.0 inch.
Drop length options: 1.25 inch; 2.25 inch and 3.25 inch.
A dual sided version is listed separately for supporting two pipes at one location.
Universal part; welding or bolting to the chassis is required and no chassis tab is supplied.
Exhaust Hangers Single Sided - FFG High-Temp Rigid Mount Kit
When your exhaust system demands rock-solid positioning without compromise, these Exhaust Hangers Single Sided deliver the rigid mounting solution your build needs. No flex. No movement. Just bulletproof support that keeps everything exactly where it belongs.
Built for the Heat
Your high-performance setup generates serious heat, and these hangers are engineered to handle it. From header proximity to turbo installations, these Exhaust Hangers Single Sided laugh at extreme temperatures while maintaining their grip and structural integrity.
Precision Meets Performance
Every hanger starts as 1/8" thick stainless steel, then gets laser-cut to exact specifications. The result? Professional-grade mounting hardware that installs clean and stays strong. No guesswork, no settling for close enough.
Complete System, Ready to Work:
- Laser-Cut Stainless Steel Hangers – 1/8" thick for maximum strength
- High-Temperature Silicone Grommets – Built for extreme heat cycles
- Aluminum Bushings – Smooth operation, lasting performance
- Stainless Button-Head Bolts – Corrosion-resistant fastening
- Nylock Nuts – Vibration-proof security
Whether you're building a weekend cruiser or a track monster, these hangers transform exhaust mounting from a headache into a highlight. Custom length and pipe diameter options ensure your system fits like it was engineered specifically for your ride.
Need to support dual exhaust pipes instead? Check out our Exhaust Hangers Dual Sided for the same bulletproof mounting strength across both pipes.
*Available in 2-pack or 4-pack configurations.
Vendor: Fat Fender Garage
Hanger material: 1/8 inch thick stainless steel; laser cut
Grommet: high temperature silicone
Bushings: aluminum
Fasteners: stainless button head bolts with nylock nuts
Configuration: single sided; one pipe per hanger
Pipe diameter options: 2.5 inch; 3.0 inch
Drop length options: 1.25 inch; 2.25 inch; 3.25 inch
Pack sizes: 2 pack; 4 pack
Listed price 25.00 USD
Variant count: 12
No grommet temperature rating in degrees; durometer or bolt thread size is published on this listing
Tagged for 1953-79 Ford trucks; 1966-79 Ford Broncos and 1947-87 Chevy trucks.
The hanger mounts to your chassis by welding or bolting; no chassis tab or weld bung is supplied.
For two pipes at one location use the dual sided hanger instead.
