Ford FE Ready-to-Run Distributor — 332 through 428 FE, CARB E.O. D-40-39
$660.95
Ready-to-Run distributor for Ford FE engines, 332 through 428, with a built-in 7.5 amp module, vacuum and mechanical advance and no box needed. C.A.R.B. E.O. D-40-39.
Install Level: Easy
Ignition coil not included.
Ships with a cast iron gear. Steel gears are for hydraulic roller cams.
Finish the Build Right
Parts our crew pairs with this kit so your swap goes together right the first time.
-
Ford FE Pro-Billet Distributor — 332 through 428 FE, MSD Box Required
$519.95
Details for Ford FE Pro-Billet Distributor — 332 through 428 FE, MSD Box Required
Three wires. Full spark. Street legal.
A Ready-to-Run distributor covering the whole FE family — 332, 352, 360, 390, 406, 410, 427, and 428 — with the module built into the billet housing. 7.5 amps to the coil, a built-in rev limiter, vacuum advance, and C.A.R.B. E.O. D-40-39.
Weak breaker points and tired rebuilt distributors are what hold an FE back. This one replaces all of it and brings its own brain: a high-output module inside the billet housing fires a 7.5 amp single spark through high rpm. Quick starts, snappy throttle, no separate box on your firewall.
It is built to be driven. The vacuum advance canister is there for cruising economy and can be locked out. The mechanical advance sits on top of the shaft and tunes with supplied springs and stop bushings, so a curve change happens on the engine instead of in pieces on a bench.
The housing runs 5/8 inch smaller in diameter than stock, freeing real room in front of an FE. And this is the rare one that is 50-state legal: Emission Code 1 with C.A.R.B. E.O. D-40-39.
What's In the Box
The distributor and what ships with it:
- x1 Ready-to-Run FE Distributor — CNC Billet Housing, Built-In Module and Rev Limiter
- x1 Small Diameter Cap, HEI Terminals
- x1 MSD Race Rotor
- x1 Vacuum Advance Canister
- Advance Springs and Stop Bushings
- x1 Cast Iron Gear, Melonized QPQ Coated
- Not included: ignition coil
- Fits: Ford FE — 332, 352, 360, 390, 406, 410, 427, 428.
- Requires: no MSD ignition control. Three wires and it runs.
- Output: 7.5 Amp Single Spark. Rev Limiter: Built In. Housing: 5/8" smaller than stock.
- Gear: Cast Iron, Melonized QPQ — match gear to camshaft material.
- Emissions: Code 1, C.A.R.B. E.O. D-40-39 — 50-state legal per the application guide. Prop 65 warning.
CNC billet housing - 5/8 inch smaller in diameter than stock
Built-in module: 7.5 amp single spark through high rpm
Built-in rev limiter
Small diameter cap; HEI terminals
MSD race rotor
Vacuum advance canister - can be locked out
Mechanical advance tunes with supplied springs and stop bushings
Cast iron gear - Melonized QPQ coated
C.A.R.B. E.O. D-40-39; Emission Code 1
Includes: distributor; small diameter cap; race rotor; vacuum advance canister; cast iron gear; advance springs and stop bushings
Not included: ignition coil
Questions? Talk to the FFG Team
For fitment questions or build-specific guidance, the FFG team has you covered.
Email: info@fatfender.com
Call: (480) 621-6072
No MSD ignition control required.
Cast iron gear - confirm against your camshaft material.
