Electrical panel power hub by Fat Fender Garage with wiring on a white background
Collection of automotive battery jump starter and charging equipment on a white background
Rectangular electronic component with wires on a white background
Electrical connector with wires on a white background
Black electrical connector with red wire and digital display on a white background
Black electrical connector with red and black wires on a white background
Battery charger with cables and CTEK branding on a white background
Two coiled red wires and one coiled black wire on a white background

FFG Power Hub

Dead batteries kill more weekend plans than broken parts. The truck is done; you have not driven it in three weeks; and now you are on your back under the bed with a jump pack and a flashlight. That is not a battery problem. That is an access problem. The Power Hub puts charging; jump-starting and a real disconnect wherever your build needs them. 200-amp rated terminals. A disconnect switch that handles 200 continuous amps and 750 amps of surge - power flows or it stops; completely. A CTEK Battery Charger Maintainer comes with it; and the CTEK 56-531 Comfort Indicator Panel is built into the face so you can read charge state and catch sulfation starting before it costs you a battery. Paint ready; so it disappears into the bed or wears your color. Add 3 or 16 feet of 2AWG cable if you have not run it yet.

  • 200 continuous; 750 surge - a disconnect switch rated for what a modern build actually pulls.
  • Charging where you can reach it - the hub mounts wherever the build allows; not wherever the battery landed.
  • CTEK maintainer included - the truck stays ready between drives.
  • Sulfation caught early - the built-in 56-531 panel shows charge state and warns before damage sets in.
  • Jump-start point built in - no crawling under the bed with a jump pack.
  • Paint ready - finish it to match; it is going to be visible.

Install Level: Advanced

Paint ready - finish it to match your build.
Optional 2AWG power wire sets: 3 foot or 16 foot; two red and one black.
The attached schematic is an example only and not a one-size-fits-all wiring diagram for your build.
Correct wire gauge; fusing and circuit protection; grounding; routing and secure connections are required to prevent shorts; overheating; fire; injury or damage. If you are not fully confident; consult a qualified automotive electrician.

Fat Fender Garage
SKU: FFG-PHwCHARGER ISBN:
$409.99
Expert Tech Support
ShopTested Parts
Worldwide Shipping
⚠️
WARNING: Handling passenger or off-highway motor vehicle parts can expose you to chemicals such as phthalates and lead. Learn more.
FFG Power Hub
From $409.99
Complete your buildThe Next Step for Your Build 
Overview
Specifications
Tech Resources
Compatibility

Power Management That Works for You 

Dead batteries kill more weekend plans than broken parts. The FFG Power Hub Hub Terminals Kit solves this problem - giving you charging, jump-starting, and disconnect capabilities exactly where your build demands them.

This isn't just another battery terminal setup. Your FFG Power Hub  Battery Terminals Kit delivers 200-amp rated terminals with a disconnect switch that handles 200 continuous amps and 750-amp surge loads. Real numbers for real performance when you need power to flow or stop flowing - completely.

Our flagship bed hub design solves the access problem that frustrates builders everywhere. Mount it virtually anywhere your project needs power management, and you'll always have charging and emergency jump-starting capabilities within reach.

The included CTEK Battery Charger Maintainer keeps your system topped off and ready, while the CTEK (56-531) Comfort Indicator Panel provides visual battery status monitoring and maintaining right where you can see it. This panel makes battery maintenance easy and convenient by showing charge status and indicating when harmful sulfation begins - ensuring your battery gets the care it needs for maximum life expectancy.

Complete Power Control:

  • 200-amp rated terminals - Built for serious electrical demands
  • Heavy-duty disconnect switch - 200 continuous/750 surge amp capacity
  • Mount anywhere design - Flagship bed pocket fits your project needs
  • CTEK Battery Charger Maintainer included - Professional battery maintenance
  • CTEK (56-531) Comfort Indicator Panel built in - Visual battery status monitoring and maintaining
  • Paint Ready- Match Your Finish

Ready to take control of your power? The FFG Power Pocket Battery Terminals Kit delivers the reliability your build deserves.

*The attached schematic is an example only, not as a one-size-fits-all wiring diagram for your unique build. Proper automotive wiring (correct wire gauge, fusing/circuit protection, grounding, routing, and secure connections) is required to prevent shorts, overheating, fire, injury, or damage. If you’re not fully confident, consult a qualified automotive electrician. FFG assumes no responsibility for improper installment. 

Fat Fender Garage part number FFG-PHwCHARGER
Terminals: 200 amp rated
Disconnect switch: 200 continuous amps; 750 amp surge
CTEK Battery Charger Maintainer included
CTEK 56-531 Comfort Indicator Panel built in - charge status and sulfation indication
Charging; jump-starting and disconnect in one hub
Bed hub design - mount where the build needs it
Paint ready finish
Optional power wire sets: 3 foot 2AWG or 16 foot 2AWG; two red and one black
Installation manual: FFG Power Hub PDF
Supplied schematic is an example only
Universal - no vehicle application is published for this listing.
Mounts wherever your build needs power management; designed around bed pocket mounting.
200 amp rated terminals; disconnect rated 200 continuous and 750 surge amps.
Optional 3 foot or 16 foot 2AWG power wire sets.

SEARCH OUR STORE

Engines, A/C accessories, steering, brakes, & more. Get everything you need for your truck restoration at home.