1973-79 Ford Truck Non-EFI Fuel Tank
Fitment Note: On some applications, the rear crossmember may need to be relocated to fit this fuel tank properly.
Description
- This tank mounts between the stock frame rails behind the axle location and retains the stock fill location. 31.5" x 24" x 10" Taper to 6"
- Tank Material: 1/8" 5053-H32 Aluminum
- 1/2″ NPT Vent
- 3/8″ NPT Return
- Fuel Fill 2.25 Ribbed for Hose
- 5/8" Ribbed or Hose Fill Vent
- 3/8" NPT Pickup Tube on 12 Bolt Plate
- 3 Baffles
- Sending Unit Flange
- Approx. 23
Flush Bed Fill: Standard bed fill tank with cap. The standard bed fill tank will come with a threaded cap and neck as shown in the pictures which sticks up approx. 3” and sits just below the bed floor. This will require you to have a bed fuel door.
Fuel Level Sensor: We recommend one of two sending units to fit your needs; A 0-90 OHM fuel level sensor for aftermarket gauges or a 75-10 OHM fuel level sensor if you are using stock gauges with our Coyote Swap tanks.
Rollover Safety Vent: We also include the rollover safety vent, which is a simple ball check valve that allows air in and out of the tank as needed. In the event of a rollover, the ball will drop and block the vent port from leaking fuel. Additionally, it also has a small float inside that will help reduce the amount of liquid entering the vent hose from fuel slosh during normal everyday use.
Fat Fender Garage creates industry‑leading parts, interiors, chassis, and full custom classic‑truck builds for owners who want today’s performance while preserving the soul of their original ride.
