Dropship, DropshipOnly(NoBundle), flange, fuel, Fuel System, gas, OHM, sensor, stainless, stainless steel, vertical, C10/F100 Stainless Sending Unit, Fuel System, Fat Fender Garage, Boyd Welding

C10/F100 Stainless Sending Unit

Stainless. Vertical. Ten inches; no adjustment needed. A fuel gauge that lies is worse than no gauge at all; and the usual culprit is a bent float arm on a swing sender that somebody guessed at when the tank went in. This one takes the guessing out. It is a vertical sensor built to the exact depth of our C10 and F100 tanks; 10 inch; fixed; not adjustable. Bolt it in and the reading is right because the geometry was right before it shipped. All stainless construction; inside a tank that is not a luxury. It is the difference between a sender that reads true in year eight and one that sticks at three quarters. 0 ohms empty; 90 ohms full - the standard signal for aftermarket gauges. Standard 5 bolt flange so it drops onto any 5 bolt sensor flange. Viton gasket and five stainless machine screws in the box. Fit it once.

  • Built for a 10 inch tank - fixed depth means the reading is correct without bending an arm and guessing.
  • All stainless construction - the part of a fuel system that never gets inspected should not be the part that corrodes.
  • 0-90 ohm standard signal - matches aftermarket gauges directly.
  • Any 5 bolt flange - the common SAE pattern; drops onto the store C10 and F100 tanks and others like them.
  • Viton gasket included - a fuel rated seal and the stainless screws to hold it; no scavenging hardware.

Install Level: Easy

Fits 10 inch deep tanks only. This sender is not adjustable.
0-90 ohm range; for aftermarket gauges. It will not read correctly on a stock gauge expecting 75-10 ohm.
Standard 5 bolt flange; fits any 5 bolt sensor flange.
For 12 volt electrical systems.

Boyd Welding
SKU: 33020-9.5 ISBN: 41360422928574
$48.00
Expert Tech Support
ShopTested Parts
Worldwide Shipping
⚠️
WARNING: Handling passenger or off-highway motor vehicle parts can expose you to chemicals such as phthalates and lead. Learn more.
C10/F100 Stainless Sending Unit
$48.00
Complete your buildThe Next Step for Your Build 
Overview
Specifications
Tech Resources
Compatibility

This all stainless steel vertical sensor is specifically used in our C10/F100 tanks. Our 0-90 OHM sending unit only fits 10" deep tanks, is not adjustable and comes with a standard 5 bolt flange. 

Details

  • Ohm Range = 0 ohms empty  90 ohms Full
  • 12V- Electrical systems
  • All Stainless Steel Construction
  • Fits any 5 bolt sensor flange
  • 1) sensor
  • 1) Viton Gasket
  • 5) 10-32 SS Machine Screws
Part number 33020-9.5
Vendor: Boyd Welding
Type: vertical fuel level sensor
Construction: all stainless steel
Ohm range: 0 ohms empty to 90 ohms full
Tank depth: 10 inch; not adjustable
Flange: standard 5 bolt; fits any 5 bolt sensor flange
Electrical system: 12 volt
Included: (1) sensor; (1) Viton gasket; (5) 10-32 stainless steel machine screws
Listed price 48.00 USD
Variant count: 1
Used in the Fat Fender Garage C10 and F100 fuel tanks.
Fits 10 inch deep tanks only; the unit is not adjustable to another depth.
Fits any standard 5 bolt sensor flange.
0-90 ohm output for aftermarket gauges; stock gauges generally want a 75-10 ohm sender instead.

SEARCH OUR STORE

Engines, A/C accessories, steering, brakes, & more. Get everything you need for your truck restoration at home.