Endo-VT Air Tank
The valves are inside the tank. Look under most air ride builds and you find a tank; a manifold bolted near it and a knot of line and wire connecting the two. It works. It also takes up the space and it is the first thing anyone sees when the bed cover comes off. The ENDO-VT puts the valves in the tank. One machined aluminum body; ports cut into the solid material and flush with the outside; nothing bolted to the side of it. What you see is a tank; what you get is tank and manifold in one. The valves are Accuair's next generation - VFC variable flow control so a corner can be metered rather than simply opened; and DOT approved FFPTC fittings that are fully filtered and rebuildable rather than replaced. The whole thing is bolted rather than welded. Machined aluminum components; ultra high strength hardware; no seam to weep and no steel to rust from the inside where you cannot see it. Five gallon at 29.312 inch long or three gallon at 18.312 inch. Both 6.625 inch across. Measure the space before you choose.
Install Level: Advanced
Valve integrated air tank. The valve manifold is built in; no external manifold is required.
The 5 Gallon variant is the one priced.
5 Gallon: length 29.312 inch; height 6.625 inch; diameter 6.625 inch. 3 Gallon: length 18.312 inch; height 6.625 inch; diameter 6.625 inch.
VFC variable flow control valves with DOT approved fully filtered and rebuildable FFPTC fittings.
Weldless bolted construction in precision machined aluminum. Raw aluminum finish.
Every good air suspension kit should have a high quality air tank to store the air produced by the air pumps. Most air tanks on the market are going to require you to run valves externally, meaning you will have more to deal with during install and more plumbing that will be visible. Our patented ENDO-VT™ valve integrated air tank provides a cleaner install by having the valves integrated into the air tank. This allows for quicker installs and an overall nicer presentation in your trunk, truck bed, or anywhere else you choose to mount your tank. The ENDO-VT also represents AccuAir’s next generation of solenoid valve technology that includes VFC™ (variable flow control) in addition to D.O.T. approved fully filtered and rebuildable FFPTC (fully-filtered push-to-connect) fittings.
About ENDO Tanks
AccuAir’s ENDO-Tank product line is the result of years of engineering accomplishments and represents the largest leap forward in air tank technology for 100 years. The system allows tanks to be built modularly with all precision machined aluminum components and with a bolted construction. As a result, these tanks are weld-free and leak-free. Ports are machined directly into the solid aluminum body and are flush with the outside of the tank. Modular construction allows the end-caps to be removed allowing for never before imagined feature combinations to go inside the tank. These tanks are offered in raw aluminum.
What Size Tank Do I Need For Air Suspension?
One of the most common questions surrounding air suspension air tanks is “what size tank do I need for my air suspension kit?” Most air suspension systems are going to utilize a 3 gallon or 5 gallon air tank. The size you will need will depend on how often you plan on using your air suspension and the type/quantity of air compressor you are using. If you plan on airing out every chance you get, you may want to get a 5 gallon tank to store more air for quicker operation. Our ENDO tanks are offered in 3 gallon and 5 gallon options.
The 5 gallon ENDO air suspension tank dimensions are: Length: 29.312" Height: 6.625" Diameter: 6.625"
The 3 gallon ENDO air suspension tank dimensions are: Length: 18.312" Height: 6.625" Diameter: 6.625"
Type: ENDO-VT valve integrated air tank
Integrated valves: yes - valve manifold built into the tank
Valve technology: VFC variable flow control
Fittings: DOT approved fully filtered and rebuildable FFPTC push-to-connect
Construction: weldless bolted modular assembly; precision machined aluminum components
Ports: machined directly into the solid aluminum body; flush with the outside of the tank
End caps: removable
Finish: raw aluminum
Published sizes: 5 Gallon and 3 Gallon
5 Gallon dimensions: length 29.312 inch; height 6.625 inch; diameter 6.625 inch
3 Gallon dimensions: length 18.312 inch; height 6.625 inch; diameter 6.625 inch
Listed price 899.95 USD on the 5 Gallon variant
No valve or corner count; port count; working pressure rating or weight is published on this listing
Replaces a separate tank and valve manifold in a four corner air suspension build.
Needs an ECU or controller and one or more compressors. Neither is included.
No Gen: tag and no vehicle application is published on this listing; generations are left blank rather than guessed.
