Touchpad + Upgrade Height + Air Suspension Management
The control in your hand rather than in your pocket. An app is fine until you are backing a trailer; it is raining and the phone is face down on the seat. A physical pad you can find without looking is a different kind of control. The TouchPad+ puts the whole system on one face. Buttons 1; 2 and 3 recall the heights you programmed with Height+; the up and down pad works each corner on its own and a dual press takes the front or the rear together. The cable is connectorless - a no-break design so it can live loose in your hand or go through a panel without a plug in the middle waiting to fail. The frame is magnetic. Any standard magnetic mount and the pad goes where you want it; on the dash; on the column or in the console. The LED compressor indicator is the detail you appreciate later. One glance tells you the pumps are running and the tank is filling.
Install Level: Moderate
Physical controller for an Accuair e-Level+ air suspension system.
Preset buttons 1; 2 and 3 require the Height+ sensor upgrade to be installed.
Individual corner adjustment plus dual front or rear raise and lower.
No-break connectorless TouchPad cable; magnetic frame for standard magnetic mounts; LED compressor status indicator.
AccuAir’s patented TouchPad+ is the latest technology in air suspension management. This touchpad allows you to easily control your air suspension from the palm of your hand. Taking a closer look at the TouchPad+, you will notice that you can easily adjust your air suspension system in multiple ways. If you have height sensors installed, you can use the 1,2, and 3 buttons to automatically adjust your ride height to the predetermined height setup with your Height+ upgrade.
If you are wanting to adjust each corner individually, you can use the up and down buttons on the right side of the controller. Within these buttons, you can have a dual up or down adjustment to lower or raise the front or rear at once. The TouchPad+ allows you to take your e-Level+ system to the next level while giving you an aesthetically pleasing controller to mount in your vehicle. If you are wanting the best of the best when it comes to air suspension management controllers, choose the TouchPad+ from AccuAir.
No Break TouchPad Cable
AccuAir’s TouchPad+ is going to feature a no-break TouchPad cable that utilizes a connectorless design to allow for handheld use or panel mounting.
Magnetic Mount TouchPad
In order to keep your mounting options open, AccuAir has designed this TouchPad+ to feature a magnetic frame to allow for use with standard magnetic mounts. This gives you the ability to mount your TouchPad+ virtually anywhere in your vehicle that you can install a magnetic mount.
Compressor Status Indicator
The AccuAir TouchPad+ utilizes some of the latest air suspension technology available. One of the best features of the TouchPad+ is the LED compressor status indicator. This light lets you know when your compressor or compressors have kicked on for a quick and easy diagnostic of your system.
Type: TouchPad+ air suspension controller
System: Accuair e-Level+ air management
Preset buttons: 1; 2 and 3 - recall programmed heights; requires the Height+ sensor upgrade
Manual control: individual corner up and down; dual press for front or rear together
Cable: no-break connectorless design for handheld use or panel mounting
Mounting: magnetic frame for standard magnetic mounts
Indicator: LED compressor status light
Listed price 439.95 USD
No cable length; pad dimensions; voltage; current draw; connector type or mount hardware is published on this listing
Works with the Accuair e-Level+ system. The 1; 2 and 3 preset buttons need the Height+ sensor upgrade to do anything.
No Gen: tag and no vehicle application is published on this listing; generations are left blank rather than guessed.
