7.3L Engine Control Pack w/ Manual Transmission

430 horsepower; 485 pound-feet; three pedals. A stick behind a 7.3L Godzilla is one of the great combinations nobody at Ford ever sold you in a showroom. It also removes the safety net. There is no transmission controller doing the thinking; the PCM has to be right and the wiring has to be right or nothing happens when you turn the key. M-6017-73M is the Ford Performance pack for the 2020-2022 Super Duty 7.3L gas engine M-6007-73 with a manual transmission. PCM carrying the Ford Performance calibration; a control pack harness that replaces the production body harness; and an electronic throttle pedal so there is no cable to route. Induction comes with it: the Mustang Bullitt airbox and the 87mm Mustang Bullitt throttle body M-9926-M50B with its M-9474-M5087 adaptor; plus the MAF sensor and upstream O2 sensors. Two absolutes: a return-type fuel system; and this PCM will not start a production vehicle. It is built for a custom chassis and nothing else. Competition and off-highway use only.

Install Level: Advanced - engine swap wiring; PCM calibration and full body harness replacement

Requires a return-type fuel system. The PCM calibration will not work with a returnless system.
Installing this PCM in a production vehicle results in a no-start condition.
Built for the 2020-2022 Super Duty 7.3L gas engine M-6007-73 with a manual transmission.
This part is designed and intended for competition use only or off-highway use only. It should not be installed on a vehicle that is driven on public roads and highways. Installation on a road-going vehicle is likely to violate U.S. and Canadian motor vehicle emissions law.