1973-79 Ford Truck Non-EFI Fuel Tank
$555.00
Non-EFI fuel tank for 1973-79 Ford trucks. About 23 gallons of baffled aluminum behind the axle using the stock fill, with an EFI-ready flange for a later swap.
Install Level: Moderate
Fuel pump, sending unit, fuel line, hose and clamps are not included.
The rear crossmember may need to be relocated on some trucks.
Built to order. Lead time 4-6 weeks.
SKU: FFG-F7379-NonEFITank
Finish the Build Right
Parts our crew pairs with this kit so your swap goes together right the first time.
-
FFG Returnless Style Fuel Line System
$629.00
Details for FFG Returnless Style Fuel Line System
-
Push Fuel Cap and Adapter
$81.99
Details for Push Fuel Cap and Adapter
-
FFG Billet Aluminum Wood Bed Fuel Door
From $204.99
Details for FFG Billet Aluminum Wood Bed Fuel Door
FFG Billet Aluminum Wood Bed Fuel Door From $204.99 -
1973-79 Truck COYOTE SWAP Fuel Tank and Fuel Pump
From $1,263.76
Details for 1973-79 Truck COYOTE SWAP Fuel Tank and Fuel Pump
1973-79 Truck COYOTE SWAP Fuel Tank and Fuel Pump From $1,263.76
Fitment Note: On some applications, the rear crossmember may need to be relocated to fit this fuel tank properly.
Description
- This tank mounts between the stock frame rails behind the axle location and retains the stock fill location. 31.5" x 24" x 10" Taper to 6"
- Tank Material: 1/8" 5053-H32 Aluminum
- 1/2″ NPT Vent
- 3/8″ NPT Return
- Fuel Fill 2.25 Ribbed for Hose
- 5/8" Ribbed or Hose Fill Vent
- 3/8" NPT Pickup Tube on 12 Bolt Plate
- 3 Baffles
- Sending Unit Flange
- Approx. 23
Flush Bed Fill: Standard bed fill tank with cap. The standard bed fill tank will come with a threaded cap and neck as shown in the pictures which sticks up approx. 3” and sits just below the bed floor. This will require you to have a bed fuel door.
Fuel Level Sensor: We recommend one of two sending units to fit your needs; A 0-90 OHM fuel level sensor for aftermarket gauges or a 75-10 OHM fuel level sensor if you are using stock gauges with our Coyote Swap tanks.
Rollover Safety Vent: We also include the rollover safety vent, which is a simple ball check valve that allows air in and out of the tank as needed. In the event of a rollover, the ball will drop and block the vent port from leaking fuel. Additionally, it also has a small float inside that will help reduce the amount of liquid entering the vent hose from fuel slosh during normal everyday use.
Vendor: Boyd Welding
Tank material as published: 1/8 inch 5053-H32 aluminum
Tank dimensions: 31.5 inch x 24 inch x 10 inch taper to 6 inch
Approximate capacity: 23 gallons
Mounting: stock behind axle location using the stock fill location
Fuel fill: 2.25 inch ribbed for hose
Fill vent: 5/8 inch ribbed for hose
Tank vent: 1/2 inch NPT
Return: 3/8 inch NPT
Pick up: 3/8 inch NPT pick up tube on a 12 bolt plate
Baffles: three
Sending unit flange: yes
Included: pick up tube adapter; rollover safety valve
Lead time: 4-6 weeks; built to order
Listed price 555.00 USD
Mounts in the stock behind axle location using the stock fill location.
Non-EFI application: carbureted engines using a mechanical or low pressure pump.
Upgradeable to an in-tank EFI pump later; the flange is the 12 bolt EFI pattern.
On some trucks the rear crossmember must be relocated to clear the tank.
Built to order with a 4-6 week lead time.
Talk to a Parts Specialist
Not sure it fits your truck, or planning a bigger build? Our parts specialists will help you get the right parts the first time.
Tip: have your truck's year, make and model handy.
Hours: Mon–Thu 8am–5pm · Fri 8am–2pm (Arizona Time)
Reach out after hours and we'll get back to you the next business day.