1973-77.5 Ford Highboy Non-EFI Fuel Tank
05/27/22 update: – All tanks are built to order and are currently running on a 4-6 week lead time.
Fat Fender Garage offers this built to order NON-EFI tank for your 1973-77.5 High-Boy. This tank includes a pick-up tube adapter, holds approx. 22 gallons and has a side pocket fill. These are custom tanks and are made here in the US.
Use of this tank may require you to relocate your rear crossmember!
Pick-up tube adapter and rollover safety valve are included.
- Tank Material: 1/8” 5052-H32 Aluminum
- Tank Dimensions: 26.5” x 24” x 10” Taper to 6”
- Approx. 22 Gallons
- 2.25” Ribbed for Hose
- 5/8” Ribbed for Hose Fill Vent
- ½” NPT Tank Vent
- 3/8" NPT With Pickup Tube
- 3/8” NPT
- Sending unit Flange
- Baffles x3
- Mount Tabs 3 x 3 x 3/16 Angle x2 places
Flush Bed Fill: Standard bed fill tank with cap. The standard bed fill tank will come with a threaded cap and neck as shown in the pictures which sticks up approx. 3” and sits just below the bed floor. This will require you to have a bed fuel door.
Fuel Level Sensor: We recommend one of three sending units to fit your needs; A 0-90 OHM fuel level sensor for aftermarket gauges, a 75-10 or 240-33 fuel level sensor if you are using stock gauges with our Coyote Swap tanks.
Rollover Safety Vent: We also include the rollover safety vent, which is a simple ball check valve that allows air in and out of the tank as needed. In the event of a rollover, the ball will drop and block the vent port from leaking fuel. Additionally, it also has a small float inside that will help reduce the amount of liquid entering the vent hose from fuel slosh during normal everyday use.