
1978-79 Ford Bronco Non-EFI Fuel Tank
Description
- Tank Material: 1/8” 5052-H32 Aluminum
- Tank Dimensions: 31.5” x 19.75” x 10”
- Approx. Gallons: 20
- Fuel Fill: 2.25” Ribbed for Hose
- Vent 1: 5/8” Ribbed for Hose Fill Vent
- Vent 2: ½” NPT Tank Vent
- Return: 3/8” NPT
- Sending unit Flange: YES
- Baffles: YES x3
- Mount Tabs: YES 3 x 3 x 3/16 Angle x2 places
Bed Fill: Standard bed fill tank with cap. The standard bed fill tank will come with a threaded cap and neck as shown in the pictures which sticks up approx. 3” and sits just below the bed floor. This will require you to have a bed fuel door.
Fuel Level Sensor: We recommend one of three sending units to fit your needs; A 0-90 OHM fuel level sensor for aftermarket gauges, a 75-10 or 240-33 fuel level sensor if you are using stock gauges with our Coyote Swap tanks.
Rollover Safety Vent: We also include the rollover safety vent, which is a simple ball check valve that allows air in and out of the tank as needed. In the event of a rollover, the ball will drop and block the vent port from leaking fuel. Additionally, it also has a small float inside that will help reduce the amount of liquid entering the vent hose from fuel slosh during normal everyday use.