Linear Actuator
One hundred and ten pounds of push. Both directions. Powered lids and covers usually fail in the same place: a motor that is strong enough to open something and nowhere near strong enough to control it coming back down. These LACT series actuators push and pull at 110 lbs with built in limit switches; so the travel stops where the unit says it stops rather than where a linkage runs out of room. Two lengths. The LACT-6 runs 11-1/2 inch retracted to 17-1/2 inch extended in 10 seconds. The LACT-8 runs 13-1/2 inch to 21-1/2 inch in 13 seconds. Measure your opening arc before you pick. Each one arrives complete: machined aluminum mounting brackets; a control switch and a wiring harness. The mounting plate is 1-1/8 inch by 1-1/2 inch wide. Trunk lids; tonneau covers; amplifier racks; compartment covers; storage drawers. Anywhere something heavy should move on its own.
Install Level: Intermediate - mechanical mounting and twelve volt wiring
Force: 110 lbs pushing and pulling.
Built in limit switches.
Published uses: trunk lids; tonneau covers; amplifier racks; compartment covers and storage drawers.
The PAC-3100 and PAC-3200 programmable controllers are separate listings.
All new linear actuators (LACT series) provide 110 lbs of pulling and pushing force and come in 6" or 8" lengths to accommodate a variety of uses. The actuators can be used in applications from lifting trunk lids and tonneau covers, amplifier racks, compartment covers and storage drawers. Each unit has built in limit switches and comes complete with machined aluminum mounting brackets, control switch and wiring harness.
Details
- Mounting Plate Dimensions: 1-1/8" x 1-1/2"W
- LACT-6 - 6" Linear Actuator: Length: 11-1/2" retracted to 17-1/2" extended in 10 sec.s
- LACT-8 - 8" Linear Actuator: Length: 13-1/2" retracted to 21-1/2" extended in 13 sec.s
Vendor: Dakota Digital
Force: 110 lbs pushing and pulling
LACT-6: 6 inch stroke; 11-1/2 inch retracted to 17-1/2 inch extended in 10 seconds
LACT-8: 8 inch stroke; 13-1/2 inch retracted to 21-1/2 inch extended in 13 seconds
Mounting plate dimensions: 1-1/8 inch by 1-1/2 inch wide
Limit switches: built in
Contents: machined aluminum mounting brackets; control switch and wiring harness
Listed price 275.00 USD
Variant count: 2
No published duty cycle; current draw or ingress rating on this listing
Published uses are trunk lids; tonneau covers; amplifier racks; compartment covers and storage drawers.
Tagged across the Ford 1953-79; Bronco 1966-79 and Chevy 1947-87 generation buckets as a universal part.
Each unit includes machined aluminum mounting brackets; a control switch and a wiring harness.
Programmable operation requires a PAC-3100 or PAC-3200 controller; those are separate listings.
