ROT-120 Ride Height Sensor w/ Linkage & Hardware
ROT-120 Ride Height Sensor w/ Linkage & Hardware – view 2
ROT-120 Ride Height Sensor w/ Linkage & Hardware – view 3
ROT-120 Ride Height Sensor w/ Linkage & Hardware – view 4
Specs & Fitment Add-On Parts Ask a Specialist

ROT-120 Ride Height Sensor w/ Linkage & Hardware

$137.95

AccuAir ROT-120 ride height sensor with linkage and hardware for classic truck air ride builds, a plug and play replacement for e-Level and e-Level+ sensor assemblies.

  • The whole corner in one box - sensor; linkage and hardware rather than three orders and two waits.
  • Plug and play - the connector matches the e-Level harness; no splicing into a working loom.
  • Restores height memory - presets are only as honest as the sensor feeding them.
  • Stops the hunting corner - a failed sensor makes the system chase a height that is not there.
  • Same parts as the kit - the assembly the e-Level calibration was built around.

Install Level: Moderate

Requires ride height recalibration after install.

SKU: AA-3678

⚠️
WARNING: Handling passenger or off-highway motor vehicle parts can expose you to chemicals such as phthalates and lead. Learn more.
ROT-120 Ride Height Sensor w/ Linkage & Hardware
$137.95

Finish the Build Right

Parts our crew pairs with this kit so your swap goes together right the first time.

1–2 of 4
  • Cab Corner - LH - 53-56 F100 F250 $39.99 Details for Cab Corner - LH - 53-56 F100 F250
  • ROT-120 Plastic Arm Replacement $16.95 Details for ROT-120 Plastic Arm Replacement
  • FFG Hide-Away Air Ride and EFI Controller Mount From $59.99 Details for FFG Hide-Away Air Ride and EFI Controller Mount
  • e-Level 4-Corner Height Sensor Harness $181.95 Details for e-Level 4-Corner Height Sensor Harness

If you are needing to replace an RPT-120 ride height sensor and all of its related components, this kit is going to be perfect for making the repair. This kit will feature an ROT-120 ride height sensor, the linkage, and hardware to get it all installed.

ROT-120 Ride Height Sensor 

On air suspension systems, some items may have to be replaced or serviced over time depending on how much you use your system and what type of climate you are in. Our eLevel+ kit utilizes ride height sensors to read where your vehicle currently sits to give you accurate readings in your e+ app. These AccuAir e-Level sensors feature a plug and play design to make them fully replaceable if you have one become damaged or start to malfunction. 

ROT-120 Linkage & Hardware

In every AccuAir e-Level kit, you will get height sensors, linkage, and hardware. The linkage component of this kit can become damaged or broken over time leaving you with a malfunctioning air suspension system. AccuAir has you covered with a direct replacement ROT-120 linkage and hardware kit. This kit features the same components found in your e-Level kit to allow you to easily replace your damaged components with high-quality replacements.

What Is A Air Suspension Ride Height Sensor?

An air suspension ride height sensor is a sensor that is installed on a vehicle with air suspension to monitor the height at which the vehicle is currently sitting. Heigh sensors allow users to easily get to pre-set heights at the push of a button. This enables you to get to your favorite ride height without having to pulse your switch to fine-tune your suspension every time you want to air out or up.
Accuair part number AA-3678
Type: ROT-120 rotary ride height sensor supplied with linkage and hardware
Contents: 1 ROT-120 ride height sensor
Contents: linkage
Contents: mounting hardware
Connection: plug and play
Application: Accuair e-Level and e-Level+ ride height sensing
Listed price 137.95 USD
No sweep angle; supply voltage; output signal type; connector part number or linkage length is published on this listing
Quantity per order is not published on this listing
Universal air management component. Defined by the Accuair e-Level system it reports to rather than by the vehicle.
Direct replacement for the ride height sensor assemblies in Accuair e-Level and e-Level+ kits.
Supplied with linkage and hardware. The sensor alone is rot-120-ride-height-sensors-w-o-linkage-hardware.
No Gen: tag and no vehicle application is published on this listing; generations are left blank rather than guessed.

Talk to a Parts Specialist

Not sure it fits your truck, or planning a bigger build? Our parts specialists will help you get the right parts the first time.

Tip: have your truck's year, make and model handy.

Email info@fatfender.com Call (480) 621-6072

Hours: Mon–Thu 8am–5pm · Fri 8am–2pm (Arizona Time)

Reach out after hours and we'll get back to you the next business day.

SEARCH OUR STORE

Engines, A/C accessories, steering, brakes, & more. Get everything you need for your truck restoration at home.