ENDO PTC Fitting Repair Kit

Three collets. Three screens. Three o-rings. A push-to-connect fitting is four small parts doing one job: grip the tube; seal against it; filter what goes past. Damage any one of them and the fitting will hold air right up until the moment it does not. They get damaged on install. A collet gets pried on with a screwdriver; a tube goes in crooked; someone pulls the line out under pressure and the teeth let go. The tank is fine. The fitting is not. This kit rebuilds three of them - o-ring; filter screen; collet and tube support for each. Cheaper than a fitting and far cheaper than pulling a tank back out. Buy it before you need it and it costs twenty two dollars. Buy it after and it costs a weekend.

  • Rebuilds three fittings - o-ring; screen; collet and tube support for each rather than a single part.
  • Fixes the fitting; not the tank - a damaged collet does not mean a new port or a new tank.
  • Quick release stays quick - a fresh collet lets you pull a line for service without cutting it.
  • Stops the slow leak - the air line o-ring is the seal that fails first and the hardest one to find with soapy water.
  • Twenty two dollars - shelf stock for a kit that is going back together at some point.

Install Level: Easy

Serves three 3/8 inch push-to-connect fittings.

Accuair Suspension
SKU: AA-3686 ISBN: 95581118
⚠️
WARNING: Handling passenger or off-highway motor vehicle parts can expose you to chemicals such as phthalates and lead. Learn more.
ENDO PTC Fitting Repair Kit
$21.95
Overview
Specifications
Tech Resources
Compatibility

Accidents happen, especially during the installation of parts where something as simple as a bolt being too tight can cause a part to break. AccuAir knows that not every install can go perfectly, so we offer replacement parts to make sure that you can complete your install with hard to find kit components to replace damaged parts. Most of our ENDO series tanks are equipped with 3/8” PTC, Push-To-Connect, fittings to aid in an easier installation. These can sometimes be damaged during installation if your installer is not careful, leaving you with a PTC fitting that will not work. AccuAir offers this direct replacement ENDO PTC fitting repair kit to make the repair quick and easy to get your ENDO tank functioning properly again.

This kit will include 3 air line o-rings, 3 filter screens, 3 PTC collets, and 3 PTC tube supports.

What Is A PTC Or Push To Connect Fitting For Air Suspension?

Push to connect fittings are one of the easiest ways to connect your airlines. These setups utilized a quick release ring to allow you to easily disconnect your airlines for servicing or removal without having to cut or replace the entire air line.

Accuair part number AA-3686
Type: push-to-connect fitting repair kit for Accuair ENDO series tanks
Fitting size: 3/8 inch PTC
Contents: 3 air line o-rings
Contents: 3 filter screens
Contents: 3 PTC collets
Contents: 3 PTC tube supports
Serves: three fittings
Listed price 21.95 USD
No o-ring size; collet material or fitting part number is published on this listing
Universal air management service part. Defined by the fitting it rebuilds rather than by the vehicle.
For 3/8 inch push-to-connect fittings on Accuair ENDO series air tanks.
The body states most ENDO tanks are equipped with 3/8 inch PTC fittings. Confirm yours before ordering.
No Gen: tag and no vehicle application is published on this listing; generations are left blank rather than guessed.

SEARCH OUR STORE

Engines, A/C accessories, steering, brakes, & more. Get everything you need for your truck restoration at home.