e-Level Main Harness

ECU to controller. Plug and play both ends. This is the spine of an e-Level install - the loom that carries everything between the brain under the truck and the pad in your hand. When it fails the system does not degrade gracefully. The controller goes dark and the whole setup feels dead. The replacement is the same harness Accuair ships in the kit. Both ends are connectors; nothing is spliced; nothing is pinned. Worth knowing before you compare it to the photo: the fuses you see pictured are gone. Auto-resetting fuses now live inside the ECU and the harness does not carry them. No length is published on this listing. If your ECU is under the bed and your pad is in the dash; confirm the run with us before ordering. Route it once and route it properly. This is not a loom you want to meet twice.

  • Plug and play both ends - the harness the kit shipped with rather than a splice and a wiring diagram.
  • The spine of the system - everything between the ECU and the controller runs through this one loom.
  • No external fuses to fail - auto-resetting protection now lives inside the ECU.
  • Fixes a dark controller - a failed main harness looks exactly like a dead TouchPad.
  • Factory connectors - keeps the plugs the system expects instead of joints you will chase later.

Install Level: Moderate

Main harness from the Accuair e-Level ECU to the TouchPad+ controller. Plug and play at both ends.
Accuair note: the product photo is for reference only. The fuses shown are no longer supplied because auto-resetting fuses are internal to the ECU.

Accuair Suspension
SKU: AA-3669 ISBN: 54272702
Expert Tech Support
ShopTested Parts
Worldwide Shipping
⚠️
WARNING: Handling passenger or off-highway motor vehicle parts can expose you to chemicals such as phthalates and lead. Learn more.
e-Level Main Harness
$93.95
Overview
Specifications
Tech Resources
Compatibility

Accidents happen, especially during the installation of parts where something as simple as a mistake can cause a part to become damaged. AccuAir knows that not every install can go perfectly, so we offer replacement parts to make sure that you can complete your install with hard to find kit components to replace damaged parts. This AccuAir e-Level main harness is going to be a direct replacement for a damaged factory harness that was included in your kit. This harness is a plug and play design and will go from your e-Level ECU to your TouchPad+ making for a quick and easy repair for a damaged harness.

Note: The product photo is for reference, although upon receiving the product you'll notice the fuses were removed and no longer needed since we put auto-resetting fuses internal to the ECU.

Accuair part number AA-3669
Type: e-Level main harness - ECU to TouchPad+ controller
Connection: plug and play at both ends
Fuses: not supplied. Auto-resetting fuses are internal to the ECU per the published note
Listed price 93.95 USD
No harness length; connector type; pin count or wire gauge is published on this listing
The product photo shows fuses that are no longer part of the harness
Universal air management component. Defined by the Accuair e-Level system it wires rather than by the vehicle.
Connects the Accuair e-Level ECU to the TouchPad+ controller.
Plug and play at both ends. Direct replacement for the factory harness.
No Gen: tag and no vehicle application is published on this listing; generations are left blank rather than guessed.

SEARCH OUR STORE

Engines, A/C accessories, steering, brakes, & more. Get everything you need for your truck restoration at home.