Coyote Radiator Hose Adapter - Lower Kit
The routing problem every Coyote swap builder runs into. You have the Coyote in the chassis. The hard part is done. Now you are staring at the lower radiator connection doing the math - wrong diameter here; wrong angle there; and the nearest parts store has exactly none of what you actually need. So you start sourcing. One elbow from this supplier. A clamp from that one. A silicone coupler that is close but not quite right. Hours of searching; dollars scattered across three carts - and at the end of it a cooling system that works but does not look like the rest of your build deserves. This kit pulls every fitting; elbow and clamp into one purpose-built package. The 90-degree and 60-degree silicone elbows handle the angles your chassis demands.
Install Level: Moderate
Not a generic hose kit - every component was chosen for the lower radiator connection on a Coyote-swapped classic Ford truck.
Confirm your radiator outlet size and orientation before ordering.
The Routing Problem Every Coyote Swap Builder Runs Into
Our lower radiator hose adapter kit pulls every fitting, elbow, and clamp into one purpose-built package — so your Coyote swap's cooling system goes together clean, looks factory, and holds up the way a build this serious deserves.
You've got the Coyote in the chassis. The hard part's done. Now you're staring at the lower radiator connection and doing the math — wrong diameter here, wrong angle there, and the nearest parts store has exactly none of what you actually need.
So you start sourcing. One elbow from this supplier. A clamp from that one. A silicone coupler that's close but not quite right. Hours of searching. Dollars scattered across three carts. And at the end of it, you've got a cooling system that works — but doesn't look like the rest of your build deserves.
That's not how a Coyote swap should finish.
We built this kit because we've been in that exact spot — and so have the builders we work with every day. Everything you need for a clean, professional lower radiator hose connection, pulled together in one package, sized and angled specifically for the Coyote in a classic Ford truck.
What This Lower Hose Kit Does For Your Build
This isn't a generic hose kit with parts that sort of fit. Every component in this package was chosen for one job — routing the lower radiator connection on a Coyote-swapped classic Ford truck the right way.
The 90° and 60° silicone elbows handle the angles your chassis demands. The precision aluminum tubes hold their shape under heat and pressure where molded rubber would eventually let you down. The Vibrant Performance T-bolt clamps lock everything down with even clamping force all the way around — no pinch points, no leak paths, no worm-drive shortcuts.
The result is a lower cooling system connection that looks intentional, seals properly, and performs every time you turn the key.
One kit. No sourcing runs. No compromises. Your build keeps moving.
Complete Lower Radiator Hose Adapter Kit
- Vibrant Performance T-Bolt Hose Clamps — 1.730" to 1.950"
- Top 90° Elbow (Vibrant) — 1.50" inlet / 1.50" outlet (x1)
- 90° Aluminum Tube — 1-1/2" on 2" CLR (x2)
- 60° Silicone Elbow — 1.50" inlet / 1.50" outlet (x1)
Lower radiator hose adapter kit for Coyote swaps
Includes 90-degree and 60-degree silicone elbows
Fittings and clamps included
Sized and angled for a Coyote in a classic Ford truck
Lower radiator hose connection.
Confirm your radiator outlet size and orientation before ordering.
