A/C Components, air, Air Management, Air Ride, Air Spring, Air Suspension, Coyote Swap Wiring, Dropship, DropshipOnly(NoBundle), filter, fitting, Fittings, harness, Suspension, Wiring, 4-Corner Solenoid Valve Harness (1 ft Pigtail), Suspension, Fat Fender

4-Corner Solenoid Valve Harness (1 ft Pigtail)

One foot of pigtail. A proper socket on the end. Solenoid connectors live at the manifold; low; wet; and in the path of everything the road throws up. When one corrodes or a wire pulls out of the socket; the valve stops answering and the corner stops moving. Splicing a new socket onto the loom is the honest repair. This pigtail gives you the correct plug and play socket for the solenoid plus twelve inches of lead - enough working room to make a real joint instead of a stretched one. It does have to be cut and spliced in. That is not a shortcut; it is the design. The socket end is the part you cannot fabricate. Solder and seal the splice properly. Bad crimps kill more electrical builds than any other single mistake.

  • Correct solenoid socket - the one part of this repair you cannot make yourself.
  • A full foot of lead - room to make a real splice instead of joining two wires under tension.
  • Saves the loom - one corroded connector does not mean a complete harness.
  • Plug and play at the valve - the socket seats on the solenoid the way the original did.
  • Repairable by design - a pigtail is how a wiring fault stays a small job.

Install Level: Moderate

1 foot solenoid valve pigtail with a plug and play socket at the solenoid end.
Must be cut and spliced into the existing harness. Not plug and play at both ends.
Splice materials and heat shrink are not stated as included.

Accuair Suspension
SKU: AA-3671 ISBN: 54502078
$49.95
⚠️
WARNING: Handling passenger or off-highway motor vehicle parts can expose you to chemicals such as phthalates and lead. Learn more.
4-Corner Solenoid Valve Harness (1 ft Pigtail)
$49.95
Complete your buildThe Next Step for Your Build 
Overview
Specifications
Tech Resources
Compatibility

Accidents happen, especially during the installation of parts where something as simple as a mistake can cause a part to become damaged. AccuAir knows that not every install can go perfectly, so we offer replacement parts to make sure that you can complete your install with hard to find kit components to replace damaged parts. This AccuAir 4-corner solenoid valve harness is going to be a direct replacement for a damaged harness. This harness will need to be cut and spliced into your existing harness and will measure in at 1 foot to give you ample working room when making your repair. It features a plug and play socket to easily connect to your solenoid.

Accuair part number AA-3671
Type: solenoid valve pigtail harness for air suspension manifolds
Length: 1 ft pigtail
Solenoid end: plug and play socket
Opposite end: cut and splice into the existing harness
Listed price 49.95 USD
No wire gauge; conductor count; socket part number or wire colour code is published on this listing
Quantity per order is not published on this listing
Universal air management component. Defined by the solenoid valve it plugs into rather than by the vehicle.
Repair pigtail for Accuair solenoid valve connections on four corner air management systems.
Requires cutting and splicing into the existing harness.
No Gen: tag and no vehicle application is published on this listing; generations are left blank rather than guessed.

SEARCH OUR STORE

Engines, A/C accessories, steering, brakes, & more. Get everything you need for your truck restoration at home.