Skip to content


1978-79 Ford Bronco EFI Fuel Tank and Fuel Pump

SKU FFG-B7879-EFITank-340
All tanks are built to order and are currently running on a 4-6 week lead time. 


Our 1978-79 Ford Bronco Stealth EFI Fuel Tank is perfect for your fuel injected motor requirements. Whether you transplanted a modern fuel injected engine, or added a Holley or FiTech EFI kit, we got you covered. This tank is designed to mount in the rear factory location on your 78-79 Ford Bronco and uses the stock side-fill. It includes the Aeromotive Stealth 340 in-tank pump. 

Aeromotive Stealth 340 in-tank pump and safety rollover vent are included. 

Tank may require relocation of rear crossmember!

Don't forget to add: Our fat fender Push Fuel Cap and Adapter and effortlessly convert Boyd 2" NPSM necks to OEM style caps.


  • Tank Material: 1/8” 5052-H32 Aluminum
  • Tank Dimensions: 31.5” x 19.75” x 10” Taper to 8”
  • Approx. Gallons: 21
  • Fuel Fill: 2.25” Ribbed for Hose
  • Vent 1: 5/8” Ribbed for Hose Fill Vent
  • Vent 2: ½” NPT Tank Vent
  • Fuel Feed: Boyd 41001 In-Tank Aeromotive Pump (included).
  • Return: 3/8” NPT
  • Sending unit Flange: YES
  • Baffles: YES x3
  • Mount Tabs: YES 3 x 3 x 3/16 Angle x2 places


Fuel Pump: This assembly includes the Stealth 340 pump for plenty of fuel pressure for your fuel injected projects. This is a great setup for Sniper, FiTech, and other fuel injection setups. Our in-tank Aeromotive 340 Stealth Fuel Pump supports up to 700 HP EFI – Forced Induction or 850 HP EFI – Naturally Aspirated. Click Here for Pump Specs.

Dual Phantom Aeromotive In-Tank Pump Upgrade: The Aeromotive 18309 Dual Phantom 340 LPH In-tank Pump Assembly is a great fit for your forced induction or naturally aspirated applications. This Dual Phantom pump Supports up to 1700 HP carbureted forced induction or 2000 HP carbureted, naturally aspirated. This black adonized top hat pump has superior flow throughout its wide pressure range and a perfect upgrade to your fuel tanks. For more information, click here. 

Fuel Level Sensor: We recommend one of three sending units to fit your needs; A 0-90 OHM fuel level sensor for aftermarket gauges, a 75-10 or 240-33 fuel level sensor if you are using stock gauges with our Coyote Swap tanks. 

Rollover Safety Vent: We also include the rollover safety vent, which is a simple ball check valve that allows air in and out of the tank as needed. In the event of a rollover, the ball will drop and block the vent port from leaking fuel. Additionally, it also has a small float inside that will help reduce the amount of liquid entering the vent hose from fuel slosh during normal everyday use.


Customer Reviews

No reviews yet