Custom Gen 3 Coyote Coil covers
Coil-on-plug; covered properly. A Gen 3 Coyote wears its coils out in the open and there is no factory answer that looks finished. Aftermarket covers usually solve the appearance and create a new problem: to touch a coil you pull the whole cover off. These are two-piece. The lower section mounts direct to your stock valve covers on supplied stainless hardware; the cap comes off on its own. When a coil needs to come out you take off a cap; not the engine dress. The set includes both covers; both caps; all hardware; and relocating brackets for the cylinder 3 coil so it has room to live. Unpainted with a CNC machined surface finish - ready for your paint; powder or left raw. Measure first. These add roughly 1 inch of width per side; and a firewall mounted brake booster or master cylinder may need attention to clear. Made to order; nonreturnable; 8-10 weeks from purchase to shipping. Engraving and badges are available if you want your shop name on the engine.
Install Level: Moderate
Direct mount to the stock valve covers with the supplied custom stainless hardware.
Two-piece design gives coil access without removing the entire cover.
Adds approximately 1 inch to engine width on each side. Measure your engine bay before ordering.
Modifications may be required to clear firewall mounted brake boosters and master cylinders.
Ships unpainted with a CNC machined surface finish.
Custom engraving and badges available; pricing varies with design complexity.
Made to order; ships 8-10 weeks after purchase.
Custom part; nonreturnable.
Gen 3 Coyote coil covers direct mount to your stock valve covers using our custom stainless hardware. Package includes both coil covers and caps, all hardware, along with relocating brackets for the coil on cylinder 3 to provide more clearance. These covers are two parts allowing for access to the coils without having to remove the entire cover.
Customized engraving/badges available but prices may vary based on the complexity of the design.
Being that these Engines are so large we advise measuring the space you have to insure a good fit in your ride. Our covers add approximately 1" to the width of the engine on each side. Modifications may have to be made for firewall mounted brake boosters and master cylinders.
Coil Covers are unpainted with a CNC machined surface finish
**These are a custom part and are nonreturnable**
Each part is made to order. Orders ship 8-10 weeks after purchase.
Custom coil covers for Gen 3 Coyote engines
Mounting: direct to stock valve covers using supplied custom stainless hardware
Construction: two-piece; cover and removable cap
Includes: both coil covers; both caps; all hardware; relocating brackets for the cylinder 3 coil
Added width: approximately 1 inch per side
Finish: unpainted with a CNC machined surface finish
Custom engraving and badges available; pricing varies with design complexity
Made to order; ships 8-10 weeks after purchase
Nonreturnable custom part
Listed price 3499.00 USD
Engine-specific; no vehicle year; model or chassis application is published on this listing.
Adds approximately 1 inch of width per side. Firewall mounted brake boosters and master cylinders may need modification to clear.
Made to order at 8-10 weeks; nonreturnable.
