FFG 1961-66 Ford Connector Kit

FFG 1961-66 Ford Connector Kit

No more parts hunting. Nothing kills momentum like chasing connectors one at a time; then finding out at the bench that they do not match or will not seal. A Saturday gone; the truck still on jack stands. These are the connectors used in our own 61-66 Ford harness builds - hand-picked over years of work; kept only when they delivered OEM-level reliability and weather resistance. No generic substitutes. No close enough. Headlight pigtail. Metri-Pack 150 sealed four-pin for tail/turn/park. Horn. Wiper; dimmer; brake and ignition. Packard 56 female terminals. Flaming River steering column connector. Fuel split. Butt connectors; ring terminals; heat shrink. Weather seals and strain reliefs in the box.

  • One box; no scavenger hunt - every connector the harness needs; sourced together.
  • Exact match - terminals and housings match the FFG harness with no substitutions.
  • Sealed where it matters - Metri-Pack 150 sealed four-pin for tail; turn and park.
  • Weather seals and strain reliefs - in the box; not a separate order.
  • Coyote or Godzilla - one kit covers both harness configurations.

Install Level: Intermediate - terminal crimping and connector assembly

Presale item - estimated to ship mid-November.
Every terminal and housing matches the FFG 1961-1966 Ford Wire Harness - no substitutions.
Compatible with both Coyote and Godzilla harness configurations.
Professional-grade connectors exceed OEM specifications.
Ships complete with weather seals and strain reliefs ready for installation.

Fat Fender Garage
SKU: FFG-F6166-WH-CK ISBN:
$499.99
Expert Tech Support
ShopTested Parts
Worldwide Shipping
⚠️
WARNING: Handling passenger or off-highway motor vehicle parts can expose you to chemicals such as phthalates and lead. Learn more.
FFG 1961-66 Ford Connector Kit
$499.99
Overview
Specifications
Tech Resources
Compatibility

*PRESALE ITEM – ESTIMATED TO SHIP MID-NOVEMBER*

FFG Connector Kit | No More Parts Hunting | 61-66 Ford Electrical Harness

Electrical Components - The Right Parts, Ready When You Need Them

Nothing kills momentum like hunting down connectors one by one, only to discover they don't match or seal properly. This connector kit gives you pre-selected connectors used in our 61-66 Ford electrical harness – sourced right, matched perfectly, built to last.

Built for Real Installers

We hand-picked these connectors through years of harness builds, choosing only components that deliver OEM-level reliability and weather resistance. No generic substitutes, no "close enough" alternatives – just the exact connectors your harness was engineered around.

Engineered to Work With the FFG 1961–66 Ford Wire Harness

Your complete kit includes:

  • Heat Shrink Tubing
  • #8 Ring Terminals
  • Female Bullet Connector
  • Butt connectors 18 Gauge
  • Butt connectors 16 Gauge
  • Female, Fully Insulated Push On Terminals
  • Pin Terminals
  • Headlight - Pigtail
  • Tail/Turn/Park - Metri-Pack 150 Sealed 4 Pin Connector
  • Horn - Ford Connector
  • Headlight, Wiper, Dimmer, Brake, Ignition Connectors
  • Packard 56 Series Female Terminals
  • Steering Column Flaming River Connector
  • Ignition Switch Pigtail
  • Fuel Split Connector

*This connector kit is engineered specifically for FFG 1961-1966 Ford Wire Harness – every terminal and housing matches exactly with no substitutions or compromises
Compatible with both Coyote and Godzilla harness configurations
Professional-grade connectors exceed OEM specifications for long-term reliability
Ships complete with weather seals and strain reliefs ready for installation
Keeps on shelf for immediate shipping – no waiting on backorders

Fat Fender Garage part number FFG-F6166-WH-CntKit
Heat Shrink Tubing
#8 Ring Terminals
Female Bullet Connector
Butt connectors - 18 gauge
Butt connectors - 16 gauge
Female fully insulated push-on terminals
Pin Terminals
Headlight pigtail
Tail/Turn/Park - Metri-Pack 150 sealed 4-pin connector
Horn - Ford connector
Headlight; wiper; dimmer; brake and ignition connectors
Packard 56 Series female terminals
Steering column Flaming River connector
Ignition switch pigtail
Fuel split connector
Weather seals and strain reliefs included
FFG 1961-1966 Ford Wire Harness.
Coyote and Godzilla harness configurations.
Flaming River steering columns - connector included.

SEARCH OUR STORE

Engines, A/C accessories, steering, brakes, & more. Get everything you need for your truck restoration at home.

Electrical & Wiring > Connectors & Terminals 1961–1966 Ford F100 (Gen 4) with the FFG 1961–1966 Ford Wire Harness Complete terminal and connector set for the FFG 1961–1966 harness; 4x Metri-Pack 150 sealed 4-pin turn/park/tail connectors; H4 headlight pigtails; Packard 56 contacts; Flaming River column connector; 2x fuel split connectors; headlight and ignition switch pigtails; ring, bullet, butt, push-on and pin terminals; heat shrink; intermediate install Terminating the FFG 1961–1966 Ford Wire Harness without sourcing connectors individually Connecting Gen 4 F100 turn, park and tail lights with sealed Metri-Pack connectors Wiring a Flaming River steering column into the FFG harness Connecting headlight, horn, fuel and ignition circuits during a Coyote, Aluminator or Godzilla swap Keeping spare terminals and heat shrink on hand for custom accessory circuits 1961-1966 Ford F100 connector kit 61-66 F100 wiring connectors Metri-Pack 150 sealed 4 pin connector Packard 56 terminals H4 headlight pigtail Flaming River steering column connector Ford horn connector headlight switch pigtail ignition switch pigtail wiring harness terminal kit Coyote swap wiring connectors Fat Fender Garage FFG Install level: Intermediate — terminal crimping and connector assembly. Required: FFG 1961–1966 Ford Wire Harness. Tools: crimp tools matched to each terminal family (see FFG 1961–66 Crimp Tool Kit), wire strippers, heat gun. Included: heat shrink tubing, #8 ring terminals, male and female bullet connectors, 16 and 18 gauge butt connectors, insulated push-on terminals, pin terminals, H4 headlight pigtails, 4x Metri-Pack 150 sealed 4-pin connectors, Ford horn connector, Flaming River steering column connector, 2x fuel split connectors, headlight switch pigtail, Packard 56 headlight contacts, ignition switch pigtail. Critical steps: slide heat shrink on before crimping, use the correct die for each terminal family, and pull-test each crimp. Automotive terminals and connectors: heat shrink tubing, #8 ring terminals, male and female bullet connectors, 16 and 18 gauge butt connectors, insulated push-on terminals, pin terminals, H4 headlight pigtails, Metri-Pack 150 sealed 4-pin connectors, Packard 56 headlight contacts, Ford horn connector, Flaming River steering column connector, fuel split connectors, headlight and ignition switch pigtails Problem: Finishing a harness install means sourcing dozens of terminals, pigtails and sealed connectors one at a time — and finding out at the bench that they don't match the harness or won't seal. Solution: The FFG 1961–66 Connector Kit packs every connector, terminal and pigtail the FFG 1961–1966 Ford Wire Harness was built around into one box. It includes four sealed Metri-Pack 150 four-pin connectors for the Gen 4 turn, park and tail lights, plus the horn, steering column, fuel, headlight and ignition switch connectors.