Power Rack and Pinion - Plain Housing
Twelve to one. New everything. Plain housing. A worn rack is a slow leak of confidence. The wheel goes vague on center; the boots start weeping; and every mile spent correcting is a mile you are not enjoying the truck. This is a complete Flaming River power rack - new valve; piston; seals; bearings; bushings and pinion and rack gears. Not a core with fresh boots pulled over it. The housing is die cast with the line position in the same place as OEM and the pinion housing is adjustable; which is what lets it go into a chassis without a fight. Robotically welded; stainless braided hoses; 6.00 inch of travel and full turning radius. Every one is fluid and pressure tested and certified before it leaves the building. Plain housing; lifetime serviceability; made in the USA.
Install Level: Advanced
All new components: valve; piston; seals; bearings; bushings; pinion and rack gears.
Plain housing version.
Fluid and pressure tested and certified before shipping.
Lifetime serviceability. Made in the USA.
Flaming River publishes tech tips at https://www.flamingriver.com/service-and-support/tech-tips
Precision robot-welded design for strength, durability and direct fit. Die cast housing features same line position as OEM and adjustable pinion housing for easy installation. Popular with many of the top chassis builders. 12:1 ratio / 2.7 turns lock to lock. Each Flaming River Power Rack is proudly made in the USA, and is fluid and pressure tested and certified before leaving our facility.
Features:
- All new components – including valve, piston, seals, bearings and bushings, and pinion and rack gears
- Robotically-welded design for strength & durability
- Stainless steel braided hoses
- Full turning radius and 6.00" of travel
- 12:1 Ratio / 2.5 turns lock to lock
- Lifetime serviceability
- Made in the USA
Vendor: Flaming River
Housing: plain; die cast with the same line position as OEM
Pinion housing: adjustable
Construction: robotically welded
Hoses: stainless steel braided
Ratio: 12:1
Turns lock to lock: published as 2.7 in the description and 2.5 in the feature list
Travel: 6.00 inch; full turning radius
Components: all new valve; piston; seals; bearings; bushings; pinion and rack gears
Testing: fluid and pressure tested and certified
Serviceability: lifetime
Origin: made in the USA
Listed price 862.09 USD
Variant count: 4
No published mounting dimensions; port sizes or weight on this listing
Plain housing version with stainless steel braided hoses.
12:1 ratio with 6.00 inch of travel and full turning radius.
The listing is tagged into the Chassis Catalog.
Confirm the application and the mounting against your chassis before ordering. No mounting dimensions are published here.
